Description

Features:

• Bump stop extensions properly limit up-travel, protecting your vehicle.
• Dual rear Add-A-Leaf Kit provides additional lift and improves weight capacity.
• Heavy-duty radius arms improve strength, allow additional tire clearance and increase ground clearance over radius arm drop kits.
• High-strength, 1/4in steel radius arms correct caster, improve tire clearance, and maximize ground clearance.
• Rear lift block and longer U-bolts for easy installation and level stance.
• Steering components included to ensure smooth post-installation operation of steering system and factory-consistent vehicle handling characteristics.
• Sway bar relocation brackets maintain operating angle for reduced body roll.

Quick Specs:

• Front Lift Height 6in
• Rear Lift Height 4in
• Material Metal
• Front Lift Method Coil Springs & Replacement Radius Arms
• Rear Lift Method Dual Add-A-Leafs & Block Kit
• Lift Type Lift Kit
• Wheel Size 17 x 9
• Back Spacing 4.5in
• Max Tire Size 37 x 12.5
• Wheel Size 2 18 x 9
• Back Spacing 2 4.5in
• Max Tire Size 2 37 x 12.5
• Wheel Size 3 20 x 9
• Back Spacing 3 4.5in
• Max Tire Size 3 37 x 12.5
• Finish Powdercoat
• Metal Cutting Required No
• Accommodates Factory Wheels See Notes
• Welding Required No

Include:

• Add-A-Leaf’s
• All Necessary Mounting / Installation Hardware
• Coil Springs
• Dropped Pitman Arm
• Rear Lift Block & U-Bolt Kit
• Sway Bar Relocation Brackets
• Radius Arms

Important Notes:

• Driveline: Although extremely rare, front and/or rear driveline vibration may occur and require driveline modification.
• Factory wheels fit when paired with factory / original equipment tire size.
• Fitment This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
• Lift Block Selection: This lift will require replacing your trucks factory rear block to achieve a level stance; total height gained will vary depending on the size of the factory block.
• Mod’s Required: Exhaust modification may be required to clear the front driveshaft on gas models. See installation instructions for more information.
• Two-piece rear drive shaftcarrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.

When you go big you can go anywhere. This 6in Radius Arm Lift Kit puts your truck into a class of its own, letting you clear huge 37in tires. Get the look and performance you want out of your 4WD 2008 – 2010 Ford F-250 / F-350.

Fitment

Brand: Zone OffRoad

• 2008-2010Ford F-250 Super Duty
• 2008-2010Ford F-350 Super Duty

Document

Video