Description

Features:

• Progressive rate front and rear coil springs improve ride quality and offroad performance while lifting and levelign the stance
• HD radius arm to correct caster while maximizing ground clearance
• Forged pitman arm and track bar relocation bracket to correct steering angles and recenter front axle
• Extended bump stops, sway bar relocation and brake line relocation to maintain factory-like operating angles
• Bump stop extensions, track bar bracket and sway bar correction to correct suspension geometry

Notes:

• Front driveline vibration may occur at speeds over 35 mph when in 4WD. If this occurs, install the appropriate optional transfer case indexing kit. Models with a 6 bolt transfer case use Zone Offroad # D5623. Models with an 8 bolt transfer case use Zone Offroad # D5813.
• Does NOT work for models with factory rear airbag suspension.
• Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
• Will not fit Power Wagon models.

Installation:

• Install Time Hours: 6 hrs
• Difficulty Level: 3 out of 5

Wheel and Tire Fitment

• Wheel Size: 17×9
• Back Spacing: 4.50
• Max Tire Size: 35×12.50
• Wheel Size: 18×9
• Back Spacing: 5.75
• Max Tire Size: 37×12.50
• Wheel Size: 20×9
• Back Spacing: 5.75
• Max Tire Size: 37×12.50

Take your RAM 2500 to new heights with this 6.5in lift kit from Zone Offroad. Kits include everything needed from front/rear coil springs and stout radius arms to steering correction and rear lift to level the stance. Get the look, performance, and capability your truck deserves with clearance for up to 37in tires.

Fitment

Brand: Zone OffRoad

• 2014-2018 Dodge Ram 2500

Document

Video