Description

Features:

• Brake line relocation brackets allow re-use of factory brake lines.
• Bump stop extensions properly limit up-travel, protecting your vehicle.
• Heavy-duty radius arms improve strength, allow additional tire clearance and increase ground clearance over radius arm drop kits.
• High-strength, 1/4in steel radius arms correct caster, improve tire clearance, and maximize ground clearance.
• Rear Add-A-Leaf Kit provides additional lift and improves weight capacity.
• Rear lift block and longer U-bolts for easy installation and level stance.
• Steering components included to ensure smooth post-installation operation of steering system and factory-consistent vehicle handling characteristics.
• Sway bar relocation brackets maintain operating angle for reduced body roll.

Quick Specs:

• Front Lift Height 6in
• Rear Lift Height 4in
• Front Lift Method Radius Arm Drop
• Rear Lift Method Add-A-Leaf & Cast Block
• Lift Type Lift Kit
• Wheel Size 17 x 9
• Back Spacing 4.5in
• Max Tire Size 37 x 12.5
• Wheel Size 2 18 x 9
• Back Spacing 2 4.5in
• Max Tire Size 2 37 x 12.5
• Wheel Size 3 20 x 9
• Back Spacing 3 4.5in
• Max Tire Size 3 37 x 12.5
• Is Adjustable No
• Finish Powdercoat
• Metal Cutting Required No
• Accommodates Factory Wheels See Notes
• Welding Required No

Include:

• Add-A-Leaf’s
• All Necessary Mounting / Installation Hardware
• Coil Springs
• Dropped Pitman Arm
• Rear Lift Block & U-Bolt Kit
• Sway Bar Relocation Brackets
• Radius Arms

Important Notes:

• Check Your Rear Springs: If your vehicle is equipped with a 4in rear block and top mounted overload or helper spring, 4 longer U-bolts may be required.
• Driveline: Although extremely rare, front and/or rear driveline vibration may occur and require driveline modification.
• Fitment This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
• Lift Block Selection: This lift will require replacing your trucks factory rear block to achieve a level stance; total height gained will vary depending on the size of the factory block.
• Mod’s Required: Exhaust modification may be required to clear the front driveshaft once lifted. See installation instructions for more information.
• Two-piece rear drive shaftcarrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.

Prepare to have everyone looking up at you with this 6in Radius Arm Lift Kit that lets you clear huge 37in tires. Built for everyday driving but sturdy enough for off-road abuse. Get the look and performance you want out of your 2005 – 2007 Ford F-250 / F-350.

Fitment

Brand: Zone OffRoad

• 2005-2007 Ford F-250 Super Duty
• 2005-2007 Ford F-350 Super Duty

Document

Video