Description

Features:

• 100% bolt-on design for easy installation.
• High-strength control arm relocation brackets correct suspension geometry and add rigidity.

Specifications:

• Front Lift Method : Coil Spring
• Front Lift Height : 6
• Rear Lift Method : Block
• Rear Lift Height : 4″
• Shocks Included : Yes

Important Notes:

• Will work with Power Wagon models with the addition of sway bar link kit D5301.
• Power Wagon models came factory with a 2″ taller ride height, so net lift gain will be 4″ over stock.
• This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration.
• Although rare, if you experience front drive-line vibration, install the optional transfer case indexing ring.
• This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
• Gas models may require modification to the front exhaust crossover pipe on driver side when using the transfer case indexing ring.
• Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
• Adding larger-than-stock wheels? Add front bumper spacers to your kit for additional clearance as some wheel / tire combos may not fully clear the bumper’s stock location.
• Works on 2013 2500 with 4 link front suspension only.
• Will not fit 1 Ton Trucks.

Fitment

Brand:Zoneoffroad

• 2009-2013 Dodge Ram 2500 3500

Document

Video